View Single Post
  #21  
Old 07-05-2004, 08:37 PM
77460ford's Avatar
77460ford 77460ford is offline
Posting Guru
 
Join Date: Feb 2002
Location: Kincardine, ON
Posts: 1,014
77460ford is gaining momentum as a positive member of FTE.77460ford is gaining momentum as a positive member of FTE.
The chart didn't start on the last pull until 3750rpm but showed the following:
RPM HP Torque
3750 324 453.8
4000 330.5 434.0
4250 329.0 406.5
4500 321.9 375.7
4750 316.8 350.3
5000 322.8 339.1
5250 330.6 330.7
5500 338.5 323.2
5750 345.8 315.9
6000 343.1 300.3
6250 344.3 289.3
6500 334.8 270.5

We spent over three hours strapped on the dyno with jet changes and timing adjustments and tweaking different little things. I'm happy with the way the motor works and the low ratio gear set in the C6 really help with a good launch. I hope to get to Grand Bend on a test and tune night and try the 1/4 just out of curiosity.

John.
__________________
'77 F150 4X4 472/C6/4:11's/35's
2 - 50lb. Nitrous bottles
Reply With Quote