View Single Post
  #18  
Old 07-05-2004, 05:18 PM
Brad Johnson Brad Johnson is offline
Elder User
 
Join Date: Jan 2004
Posts: 645
Brad Johnson is starting off with a positive reputation.
bassdude,

I couldn't find valve open/close specs on your cam but it looks like EPWI probably uses Comp Cams pieces with their name on them, so I subbed in the Comp Cams X256H numbers (the specs closest to what you listed). For those who think it takes radical cams to make good numbers, you should pay close attention to the torque curve this mild cam produces.

RPM HP / Torque
2000 208 / 546
2500 262 / 549
3000 314 / 550
3500 364 / 547
4000 408 / 535
4500 435 / 507
5000 439 / 461
5500 417 / 398

Look at the big, fat torque curve. That's 500+ lb-ft torque on tap from just off idle all the way up to 4500 rpm. Now THAT'S useful torque - Very nice!

I played with things to see if I could tweak the numbers a bit, but it looks like your combo is pretty solid.

Brad

Last edited by Brad Johnson; 07-05-2004 at 05:23 PM.
Reply With Quote