Yup, got it..Tks My old car was a 99 GP GTP..that I got into the mid 13's. So I am familiar with the SC and I also have a pulley puller...
Originally Posted by webmaster
I don't recommend going with a blower pulley unless you are comfortable with a press to install a new pulley. Its not a simple bolt on and the procedure can result in damage to the supercharger if its not done properly. I recommend you take it to someone familiar with the procedure if you change out the blower pulley.
Also, dyno pulls with a/f graphs are highly recommended when going with chip/pulley combination. Too lean a ratio is a bad thing!