Originally Posted by bigreave
when i did my i spliced into the main headlight switch for light . For your tach source i ran off the negative side of the coil green wire i think been a whil but mine is a 85
Okay,so I run the green wire on the tach to the negative side of the coil?Call me crazy...But which is the neg side of the coil?What color wire will be connected to it?
Originally Posted by 82F100SWB
Yup, green(negative) wire coming off the coil is the signal source.
For your lighting, look for a blue wire with red tracer under the dash(there's one going to the light just above the wiper switch) that'll hook you into the dash lighting, dimmer and all.
So for my lighting source,I'll be looking for a blue wire with a red stripe?That will illuminate the tach when the markers,headlights,hi-beams,etc. are turned on?
Thanks fellas
.
Nightrain