Originally Posted by kla94
There should be a wide wrench with the rental that will fit over the for bolts on the pulley. This allows you to hold the pulley and use the other wrench to turn the big nut on the clutch. LEFT HAND threads on the clutch.
Here was the most helpful idea I found for removing fan clutch nut...
Got this done, Wasn't too bad. Much more enjoyable then than damnable oil cooler (never drank so much AF as when I pulled the oil cooler off)...
1992 F250 7.3 IDI NA WHITE; 374,xxx miles
Manual glow plug push button
Duralift fuel pump
single mass flywheel - converted