View Single Post
  #11  
Old 08-18-2014, 08:57 AM
quaddriver quaddriver is offline
Posting Guru
 
Join Date: Jan 2004
Location: Cook Forest PA
Posts: 2,256
quaddriver has a very good reputation on FTE.quaddriver has a very good reputation on FTE.quaddriver has a very good reputation on FTE.
I dunno if this was mentioned - but you want to use a weight distributing setup. Even tho you have f250 springs, the frame is still the same and a 27ft trailer it going to sit at least 700lbs on that hitch - which may be over the limit for the hitch as weight carrying, but will definitely be over the limit for the frame ends

You can research my 'ford rusty frame fix' solution which can be applied even if you don't have excess rust as it replaces the last member with a stronger one and moves the attachment points
__________________
QuadDriver...

Go Fast, run over sh......stuff
Reply With Quote