View Single Post
  #25  
Old 08-05-2014, 07:34 PM
49fordv8f4's Avatar
49fordv8f4 49fordv8f4 is offline
Senior User
 
Join Date: Aug 2014
Location: North Central Arkansas
Posts: 144
49fordv8f4 is starting off with a positive reputation.
Here are a couple of photos of the cold air intake I'm working on.
Click the image to open in full size.


Click the image to open in full size.

I'm using 3" stainless mandrel bent exhaust tubing and silicone ells and connectors. I will make flanges for the "U" tube, that goes thru the inner fender, and have them TIG welded on so I can fasten the tube to the inner fender and seal out dirt from the wheel well.
Thanks, Mark
Reply With Quote