View Single Post
  #10  
Old 07-28-2014, 10:42 AM
jchosler's Avatar
jchosler jchosler is offline
Elder User
 
Join Date: Nov 2009
Location: Denver, CO
Posts: 793
jchosler is starting off with a positive reputation.
Its hard to say about the crossmembers but Im sure you'll need to modify them or drill new holes into the frame, I really doubt it'll bolt up without modification. E-fuel is another project in its own, you can buy a setup for a grand or more or piece one together, it would be very conveniant to get that done with the motor out of the truck.
__________________


97 F250 HD---3.5" D60 RSK Swap (1 ton suspension) with matching rear both at 4.10's, Beans D66, 6637, 3"x4" Tymer DP with 4" exaust and kitty delete, EBPV delete, DIY stage II's, Stricly Diesel electric fuel swap, Tony Wildman 6 pos chip, HPX, TE modded 17* HPOP, SD IC, Custom ranch hands front and rear, and my crawler of course
Reply With Quote