View Single Post
  #10  
Old 07-25-2014, 04:53 PM
Kemicalburns's Avatar
Kemicalburns Kemicalburns is offline
Post Fiend
 
Join Date: Jul 2002
Location: OregonCity,OR
Posts: 13,340
Kemicalburns has a very good reputation on FTE.Kemicalburns has a very good reputation on FTE.Kemicalburns has a very good reputation on FTE.Kemicalburns has a very good reputation on FTE.
have you done a tune up yet? cap/rotor probably need replaced. also when you set the timing you must pull the spout connector, if you didn't do this the timing will never set correctly.
__________________
94 XLT 357/E4OD/Warn HS9500I
6"ProComp Stage II 35x12.5x15 BFG AT's
4.88 gears/Aussie Front/rear open
Edelbrock efi intake JBA shorty,CustomY pipe/exhaust
http://www.supermotors.org/registry/...il.php?id=4158
Reply With Quote