View Single Post
  #35  
Old 07-23-2014, 10:37 AM
landtortise89 landtortise89 is offline
Freshman User
 
Join Date: May 2009
Location: Gooding, Idaho
Posts: 28
landtortise89 is starting off with a positive reputation.
as far as the pcv it was changed with a cheap parts store one (i work at oriellys) and i agree they seem to be crappier and letting things past as far as where it's routed i would have to look at it and report back but I will deffineately do so especially since you mention that the #8 cylinder gernaded due to the incorrect design. I will try a bottle of marvels hell at this point I am willing to try anything I just dumped a can of restore in it on the advice from one of the State mechanics (also work for the transportation department) so I wanna run that thru for a few hundred miles then change the oil I have been pouring 20-50 in it too. It's been in the 90's here and without overdrive I crank somes serious r's runing highway speeds. I will look into a few things and report back thanks for the advice