View Single Post
  #1  
Old 07-23-2014, 12:41 AM
tofargone's Avatar
tofargone tofargone is offline
Senior User
 
Join Date: Jun 2010
Location: Carlin, Nv.
Posts: 133
tofargone is starting off with a positive reputation.
what gives now I have less power

Hi everyone.
I just did a lot of work to my truck and now it has less power than before I used to be able to scare the wife with no trouble now I can't did I forget to do something. I expected to have a few more ponys not less
04 6.0 f250. 210,000 miles xlt. edge chip that it has had since I bought it.

I did a 3.5" down tube to a 4" straight pipe .
Blue spring upgrade
Egr delete. I left the valve in instead of the block off plate and it is plugged in.
I rebuilt the turbo and had the heads rebuilt.
ARP studs.
Replaced the Pistons with oem
All the gaskets ( o rings )with oem
Both fuel filters
Coolant flush
Oil change
New Map sensor
new oil cooler.
And I scrubbed the heck out of the entire engine bay and all parts that came off.
I'm thinking I will unwire the edge chip after work to see if that changes anything.
Any ideas would be great.
Reply With Quote