Thread
:
Edelbrock/Weber on a 1969 390 crappy idle when its hot out
View Single Post
#
9
07-05-2014, 06:07 PM
eman92082
Cargo Master
Join Date: Apr 2007
Location: Valley Center, California
Posts: 2,057
Likes: 1
Received 34 Likes on
12 Posts
All good points and a good phenolic spacer would be advisable. There are also aluminum shield plates I've had success with. Lastly, check your inlet pressure. If it's high, it may not care when cold, but could get cranky when warm.
Reply
Like
eman92082
View Public Profile
Find all posts by eman92082