View Single Post
  #17  
Old 07-04-2014, 12:04 PM
fbb1951's Avatar
fbb1951 fbb1951 is offline
Brent
 
Join Date: Jul 2013
Location: Loa, Utah
Posts: 119
fbb1951 is starting off with a positive reputation.
I bought seals from LMC Truck. All of the door and window seals in one kit. The window seals were great, the door seals were too thick to allow the door to shut easily. The passenger door is close enough, but I had to grind a 1/16" off the striker/latch on the drivers door. With the striker/latch pieces adjusted all the way out, I can get both doors to latch with a firm slam. I hope in time the rubber will compress and take a set.

Always something new to deal with on this project. I've just had to remove the electric wiper conversion because the arms bind the motor and blow the fuze. Any threads on that problem?
Reply With Quote