Originally Posted by The other Joe
I'm not familiar with the wireless connector you mention. Do you happen to have a link for that?
Will it work with a IPad?
It will not work with an Ipad as the torque app is for android only. I have been looking and you can pick up a tablet new for about $100. Which is still dirt cheap figuring what you can monitor and use it for. Here is the connector i purchased...
You can get more expensive ones that will power off after a certain time after the vehicle is shut off and have quicker processing speeds but i haven't had any issues with the one above.
1997 F250HD 4x4 7.3 powerstroke ext. cab long bed - Straight piped factory exhaust, MBRP 3" downpipe, DIY intake, TW custom 6 pos chip, Built E4OD, Swamps IDM, ISSpro gauges, 250cc/100% hybrids,
T500 HPOP, 4r100 trans pan, Add-a-leafs on all 4 corners, 325/60r18 Toyo's, 20% tint, HID's, LED rear bulbs, 12" subwoofer.