Excellent post, this allowed me to do the job on my 2010 Expedition. Driver window began making noises like a cat being slaughtered last summer and became really slow. Over the winter I needed my son and I to push up to close the window, then our first warm day came and I remembered I had forgotten all this. After dis-assembly following CStanley's post I saw the cable had become rusted and frayed. Ordered in the Window Reg for $200. A couple things that made it easier for me were:
1) take photos of panel off, weather shield off from various angles, it will help you remember where wires clip in.
2) Use masking tape, labeled, to show which connectors and screws belong in each position
3) When I re-assembled I found it easier to leave the door lever on the cable but not in the bracket until the door panel was returned into place. Then I gently repositioned the lever into its bracket.
4) Auto up not working yet, I will work on re-initial procedure this weekend.