View Single Post
  #4  
Old 03-27-2014, 02:20 PM
danr1 danr1 is offline
Post Fiend
 
Join Date: Aug 2006
Location: Sand Lake, MI
Posts: 5,263
danr1 has a great reputation on FTE.danr1 has a great reputation on FTE.danr1 has a great reputation on FTE.danr1 has a great reputation on FTE.danr1 has a great reputation on FTE.
Quote:
Originally Posted by fordka View Post
I have one but theres no way i would beable to get that to fit in there with the radiator.
Yea problem too, use torch to blow bolt heads off then pry compressor off them then remove what's left of bolts, A/C eliminator bracket with idler available from Napa retains use of stock belt (IIRC was about 40 bucks), if wanted to go that route.
Reply With Quote