View Single Post
  #130  
Old 02-20-2014, 10:02 PM
Piston Honda's Avatar
Piston Honda Piston Honda is offline
Senior User
 
Join Date: Sep 2013
Location: New Hampshire
Posts: 303
Piston Honda is starting off with a positive reputation.
Alright, the gas tank is in, brake lines are done, driveshaft has been POR, primed and top coated, and u joints installed.

Click the image to open in full size.
Click the image to open in full size.
Click the image to open in full size.
Click the image to open in full size.
Click the image to open in full size.
Click the image to open in full size.
Click the image to open in full size.
Click the image to open in full size.


I started on the carb and ran into something right away with the Edelbrock intake.
These pics are taken from the pass side.

Click the image to open in full size.

What is that hole in the top of the intake for? I know I have to remove the bolts and put the block off plate on, but what's the other one?
You can see in the next one that the spacer doesn't cover the hole all the way.

Click the image to open in full size.

.....and in this one you see the gasket covers the hole, but......it'll still leak air, no?

Click the image to open in full size.
__________________
1985 F-250 4x4 4 speed 351w
1978 F-100 2WD 4 speed M block
Reply With Quote