Originally Posted by
cstanley44
This project is on my radar for the upcoming weeks.
Ive not bought the rotors yet but do they require the bearings to be moved to the new ones? Or do they just slip over a hub.
Mine is 2wd.
No need to work on bearings. Just remove the old rotor and slip the new one on. It'll slide over the lugs and onto the hub. Reattach caliper bracket, then caliper. Bleed if necessary. Should be a fairly painless process except for the removal of the two 18mm caliper bracket bolts and the rotor itself if rusted to the hub.