ok here is what I found with that so called reversed set up

it IS the RIGHT way red to white , white to red they just did that for some reason or another .

if you try to reverse it (red to red etc.) it will run full 12 volts and start at the resistor (7-9 volts)

it will run white to red etc. and right

they only plug in (factory like) ONE way that is how it is supposed to be

so yeah reverse it back to reversed colors


I haven't figured out why they did it that way either , even the diagrams are that way

some with one pole on the starter solenoid mine and like 1984 and newer


and some with 2 small poles on it, 1983 and older