Originally Posted by
oldebrush
Use a cork gasket, as "Spurredon" said, and you can add something extra, very small (small enough so they just fit over the screw threads) neoprene "O" rings, on each screw. Then just tighten down evenly, a little at each screw until well seated.
Hope this works for you.
Aloha, Tony
Hi, Neoprene "O" rings Huh!!! HHMMM!! That's another good Idea didn't think of that, That may just work fine, I'm gonna go see if I find them that small and try it out also. THANKS!!! I appreciate it.