View Single Post
  #44  
Old 09-27-2013, 09:46 PM
Piston Honda's Avatar
Piston Honda Piston Honda is offline
Senior User
 
Join Date: Sep 2013
Location: New Hampshire
Posts: 268
Piston Honda is starting off with a positive reputation.
I started in on the transmission and transfer case yesterday. Took the transfer case to the local transmission shop to have all the seals replaced and the housing cleaned up.
As you can see almost all the gaskets and seals are leaking.
Click the image to open in full size.
Click the image to open in full size.
Click the image to open in full size.
Click the image to open in full size.
Don't laugh at me for using the hoist to move the transfer case, I have a bad back right now.
Click the image to open in full size.
Click the image to open in full size.
Click the image to open in full size.

I pulled the counter shaft rear bearing cap off and half the needle bearings fell out so I took the rest of them out and taped up the hole where the bearing race is and blasted it, cleaned it and put all the needle bearings back in with assembly lube.
Click the image to open in full size.
Click the image to open in full size.
Click the image to open in full size.

Shifter cover cleaned up, don't know if I'll polish it up a bit.

Click the image to open in full size.

Does anyone know how to take the shifter off of the cover? I still don't know.
__________________
1985 F-250 4x4 4 speed 351w
1978 F-100 2WD 4 speed M block
Reply With Quote