Originally Posted by sammie0126
Ya in the 2nd video with the truck running you can see the output and the arm start to move, as the wheel turns the shaft in 1/8" turn increments. But shouldn't have to go 1/8 of a turn to get the pitman to move. Nothing is loose, I think there is play in the box, worm or ***** or something. What goes in is not coming out.....
It's not a solid connection, mine moves at least that much and it tracks like a freight train. It takes a little to get everything to move like in the rear end. Remember how much play there was in the yoke when you turn it by hand?