Originally Posted by EXv10
I watched it 3 times and half of that movement by hand moves the pitman arm, When you did the 1/8" turn jiggling part the arm actually moved a tiny bit at the end of each jiggle. You eyes can only focus on one thing at a time but look closely at that 1/8" turn jiggling/arm moving part. I would get another set of eyes to see where the pitman arm and downstream is going.
Ya in the 2nd video with the truck running you can see the output and the arm start to move, as the wheel turns the shaft in 1/8" turn increments. But shouldn't have to go 1/8 of a turn to get the pitman to move. Nothing is loose, I think there is play in the box, worm or ***** or something. What goes in is not coming out.....