View Single Post
Old 08-22-2013, 04:22 PM
charliemccraney charliemccraney is offline
Posting Guru
Join Date: Apr 2003
Posts: 1,345
charliemccraney is gaining momentum as a positive member of FTE.
There are two different lengths of pushrods as well.

To install the passenger car engine, you will also have to use the truck bellhousing, swap the timing cover and mounting brackets, thermostat housing, oil pan, and exhaust manifolds. If the 272 is older, use the distributor and intake / carb for the '57 car unless you need it to look correct for some reason.
Reply With Quote