Originally Posted by
ponderbuzzard
From what I've determined looking at the parts manual illustrations the 292 has similar engine mounts to the 223, front center, and on the bell housing. The 300 will require some work in the engine mounts department.
You might get a front center engine mount to bolt up to the 300 block, but something will be needed in the way of a crossmember further to the rear, because...
The bell housing mounts are not present as on a 223.
240/300/352: 1965 F100/250 4WD, 1965/66 F350, 1966 F250 4WD uses a similar 3 point engine mounting system as 1961/64 F100/350 223/292.
Upper pic related to these 1965/66's, lower pic is 1965/72 2WD & 1966/72 F100 4WD