Originally Posted by
51FordTN
I am limited on doing a lot of fabrication.
No can do mon ami, all the front end swaps turn into fab fab fab. I think about the simplest would be to use an early F100 or bronco front end (the dreaded twin i beam).... A better quality would be a later f100 or bronco (like a dana 44 if you want to go the route of the 4x4 land) - but again FAB FAB Fan-dab-ulous.
Others might have more ideas than what I threw out there but I don't remember seeing any threads about a simple front end swap.
If you aren't going to do a ton of fab work, just go through through your front brakes and drive it with the patience and care of a drum system.