Picked up the 94 F350 Dana 60 front axle and it fit like a glove in the 97 F250.

Still have a couple bolts under the engine for the old axle brackets.

Missing a few parts and need advice.

Seems like there are many parts for this axle on a 4" lifted Jeep.

Brake lines?

F250 brake lines are way too short.

Should I get 94 brake lines $25 each. or should I opt for some aftermarket lines steel braided with extra 4 inches(not needed) ?

The pasenger side line is easy to see how to replace. Pull clip holding onto frame hold hard line with a wrench and unscrew line to caliper.

On the driver side the line seems to crimped onto a junction box with 3 lines. One to caliper, 2 hardlines with one to passenger side and another to brake system. Does the junction box come off the line to the caliper or is it crimpted onto the flexible line to the caliper?

Brackets?

Went to 4 junkyards yesterday. Could not find one part !!! The 4th junkyard told me parts dismantlers come in and take Dana 60's and all associated parts and resale them. So I went to 3 Ford truck resale dismantlers and they did not have the brackets.

Where can I get a
1986-97 Ford F250 F350 Truck Dana 60 Track Bar Mounting Bracket