My truck stopped shifting into 4wd recently. The switch tests as good, I replaced the relays and tried an aftermaket Dorman shift motor I had access to. The Dorman part did not fit well, btw.

I can manually shift the transfer case with a 9/16 wrench, with some effort.

All the fuses are good, although I should recheck them after testing stuff.

I am consistently getting the P1828 code which refers to the clockwise shift motor coil. Which is a little odd to me because it is in 2wd which is all the way clockwise.

This is not a hub problem, this is an issue with the transfer case shiftig. Someone help me out before I fab up a cable shifter or start driving my chevy 2500 with the shift lever on the floor again.

Thank you!