Originally Posted by
run6.0run
It also looks like there's a bypass oil filter kit on the pic on your website that shows the oc relocate kit installed on a psd. And the braided line coming out the front,,,it looks like its connected where the eot sensor should be at? What is it going to?
That particular customer had a bypass filtration system prior to installing IPR EOC kit. He was able to use his bypass filtration without any modifications by connecting it to the auxillary port on our oil filter cap.
The port on our filter cap can be used for a oil pressure gauge, bypass filtration etc.
I do not recommend mounting the sensor on the cap, it can fluctuate and give inaccurate temps. The oil temp sensor in our kit is mounted on the oil cooler exit fitting.