Originally Posted by
roncog
Hey Yahiko-
The upfitter relay box is installed on my 2011 F250 on the left side just near the parking brake. I could not snake the harness and connector up to where the switches are located because of lack of space.
Then my nitwit attack came to a sudden end and I removed the charging port between the cup holder and steering column by prying up and out with a small screwdriver and had plenty of room to run the harness and connector.
I'm new to this and haven't figured out how to post pictures-sorry.
Thanks to all for your help!
If you remove the charging port and then the sync port on the other side you'll see a screw behind each one. remove these two screws then you can pop to whole panel off which really opens things up for you.