Most of the later trucks have bolt nuts under the cab for the captins chairs. Locate the nuts and install a bolt from the botton up, this will mark the floor board and remove the bolt, center punch a hole and then use the bolt to finish cutting the hole. You can install captins chairs from a Bronco or XLT Lariat. You can also use the plastic console in the center. My truck originally came with captins chairs and console, and I installed an aftermarket bench seat. Still have the seats if interested in blue.


Dave

<a href="http://members.aol.com/deleontow/auto/index.htm">http://members.aol.com/deleontow/auto/index.htm</a>