View Single Post
  #757  
Old 09-25-2012, 08:02 AM
hav24wheel's Avatar
hav24wheel hav24wheel is offline
FTE Chapter Leader
 
Join Date: May 2006
Location: North Dakota
Posts: 9,685
hav24wheel has a superb reputationhav24wheel has a superb reputationhav24wheel has a superb reputationhav24wheel has a superb reputationhav24wheel has a superb reputationhav24wheel has a superb reputationhav24wheel has a superb reputationhav24wheel has a superb reputationhav24wheel has a superb reputationhav24wheel has a superb reputationhav24wheel has a superb reputation
The top rpm range is. And as Kris said, 50 bigger cubes drop the rpms of the cam 500 rpms. So have to take the usable rpm range and drop it 500 rpms for ur application.


What's the reason you are set on a roller anyways? Than are you going hydrolic or solid?

Crane Cams 359351 - Crane Hydraulic Roller Camshafts - Overview - SummitRacing.com
__________________

Dave

2003 Excursion Limited, V10, 4.88s, 315/75R16s on 16x10s
100% posting from iPhone
Reply With Quote