Ford Truck Enthusiasts Forums - View Single Post - Rockwell Build Thread
View Single Post
Old 09-24-2012, 10:49 PM
Kirbys73F100's Avatar
Kirbys73F100 Kirbys73F100 is offline
Elder User
Join Date: Oct 2009
Location: Lawrenceville, Ga
Posts: 932
Kirbys73F100 is gaining momentum as a positive member of FTE.
Originally Posted by hav24wheel View Post
First off, why such a small cam if you are going roller? Keep in mind, the cams rpm range drops as the cubes get bigger...

Also, with propane, you will loose power vs a carb on the same engine without changing something else.
Like I said before.. Any cam suggestions are welcome.
Travis, 1965 F100 Custom, 2wd 429 C6, 2500 stall, spool, 4.11 gear
1973 F100 Ranger 2wd, built 351w C6, Cragars, 3.73 gear, Detroit Locker, QTP electric cut-outs
1979 F250 Custom, 4x4 460 C6 NP205, 2.5 tons, 53's
1979 F150 SuperCab Custom, 4x4 460 T18 NP205
2000 Ranger XLT, 2.5l 2wd, 5 spd
Reply With Quote