View Single Post
  #4  
Old 09-15-2012, 10:21 PM
aussiecowboy aussiecowboy is offline
Elder User
 
Join Date: Dec 2011
Location: Echuca VIC Australia
Posts: 682
aussiecowboy is gaining momentum as a positive member of FTE.aussiecowboy is gaining momentum as a positive member of FTE.
I got the mirrors from Dennis Carpenter, going by the part number it's probably the same as Bob Drakes. The 0.28" is the standard pin measurement, the oversize ones are 11/32 which works out to 0.34". I already fitted the door with the 0.28" pins and the rear of the door has about 1/4 to 3/8" play just from hinge slop, not good when trying to get panel gaps right.
Reply With Quote