I cleaned up the firewall to prep it to weld in some reinforcing metal. I was only cleaning around the holes and the perimeter where I will be welding so the rest is still covered to help prevent rust issues.
Tomorrow starts the welding.
2001 Excursion V10 4x4 Auto 156,000 miles 285/75/16 BFG AT's, stock rims
2nd trans cooler and spin on filter, converted to electric fan (increased MPG by 1.1mpg towing) Trans temp gauge, Volt gauge, and Vacuum gauge in 3 gauge driver pillar pod, Custom Safari Rack, Full size spare on the rack, Mag light at driver door, LED interior/running board lights.
1978 Bronco 460, T19, NP205, Dana 44HD/ Dana 60, 40's "project"