Originally Posted by
Gevans17
My Ford service CD says 9-20Nm or 80-178lb/in Doesn't say anything about anti-seize.
My manual says:
Spark Plug
****** name=tps_proctitle content="Spark Plug">
Removal and Installation - Remove the coil on plugs. For additional information, refer to Ignition Coil—On Plug (COP) in this section.
- NOTE: Remove any foreign material from the spark plug wells with compressed air before removing the spark plugs.
Remove the spark plugs.
- Inspect the spark plugs. For additional information, refer to Section 303-00 .
- Adjust the spark plug gap as necessary.
- To install, reverse the removal procedure.
Torque to 18nm or 13 lb.ft., nothing about anti-seize.