#2  
Old 06-23-2012, 07:33 PM
Christof13T's Avatar
Christof13T
Christof13T is offline
Postmaster
Join Date: Apr 2012
Location: North Georgia
Posts: 2,613
Likes: 0
Received 5 Likes on 4 Posts
take a close look at the big wire harness that goes under the valve covers.
those are the uvch's that typically get a worn spot on the underside where they rub... and ground out. those carry the signal for your injectors... if that signal grounds out... the symptoms you are describing occur.

i'd bet thats whats going on.

xtof