Thread: fixing my frame
View Single Post
  #1  
Old 06-22-2012, 12:04 AM
Bluethunder3320's Avatar
Bluethunder3320
Bluethunder3320 is offline
Senior User
Join Date: Apr 2012
Posts: 245
Likes: 0
Received 0 Likes on 0 Posts
fixing my frame

a few months ago i bought this 89 F-150 custom 4x4 but its pretty beat. this is my first vehicle, i am 16. the damage: it had broken a leaf mount in the past which busted up through the bed. both leaf springs were snapped and it had no shocks/mounts.

well i put in junkyard leaf springs, got shocks, shock mounts, leaf mounts, u bolts and hardware etc. when i was doing this work on the suspension thats when i really found out how bad the condition of the frame is.

i cut out the rear gas tank (it was shot) and the rear frame piece that connects each side of the frame... well...... just fell out!

the frame was in such bad condition that it was dangerous... so i started a very long project of fixing this.. i took the bed off (only front 2 bolts were holding it), took the bumper off, hitch off, and heres where im at.

im not really sure how to go about repairing this. its too far gone to be reinforced the way it is. the rest of the frame is in good condition.