View Single Post
  #15  
Old 06-15-2012, 10:15 AM
NumberDummy's Avatar
NumberDummy
NumberDummy is offline
Ford Parts Specialist
Join Date: Nov 2006
Location: Simi Valley, CA
Posts: 88,826
Received 648 Likes on 543 Posts
3A16: Block cast January (A) 16, 1963 (3).

NOTE: The waterpump and timing cover used before 8/23/64 are not the same as used from 8/23/1964.

The early 221/260/289 waterpump will not bolt to the later 289/302 timing cover. The T/C gasket is the same 1962/96, so the early timing cover will bolt to the later blocks, but only an early waterpump will bolt to it.

You do not have a 3 sheave crank pulley, because there is no such thing.

What you have is a single sheave harmonic balancer with either two single sheave outer pulley's, or a double sheave outer pulley bolted to it.

Accessory outer crank pulleys were used with dual belt alternators, P/S, A/C, T/E.

Since the engine was originally installed in a Passenger Car, it probably had P/S & A/C. No T/E until 1/1/1966.

D9BZ-7052-A (replaced A2TZ-7052-A & C4TZ-7052-A) .. Extension Housing Seal / Available from Ford.

Use with: 2.77/3.03 & T86 3 M/T's, New Process 435 4 speed, RUG SR-OD single rail 4 speed O/D and etc.

MSRP: $17.98 // FTE sponsor tousleyfordparts.com price: $11.87.

What did Green Sales charge you for this puppy? OH resident, did you buy it in person, or have it shipped?

260's and early 289's use the same exhaust valves (C3OZ-6505-A) 37 available NOS

Early 289's use different intake valves (C4OZ-6507-A) 62 available NOS than 260's (C3OZ-6507-A) 141 available NOS.