so the other day i noticed that the blinkers needed some work so we dug in and noticed the springs behind the buttons were wasted. went to the parts store and got the wrong replacement parts. back to the parts store for the right ones and began the resto.
then the clean-up and primer
some gloss white paint
cleaned up the brass sockets
after the cleanup the brass sockets were a little loose in the housing so we pressed them back in with a extra ground wire.
back together and ready for the new insides and reinstall
napa part number is LS6469 and slides right into the stock socket location. wired back up and washed the inside of the blinker lenses. installed amber bulbs just for fun and away we go
