Ok I finally got the cd player custom mounted and all the wires hooked up but have an issue. The radio plays for awhile then shows Protect on the display. By the way I have a JVC KD-R310. I googled it and it says that either the constant power wire or the switched power wire is coming in contact with ground. I doublechecked my wiring and those wires are soldered connections with heat shrink and are in no way touching ground. I later found out that the radio was displaying Protect when the radio mount touched the dash. So I figured I had to insulate the radio from the metal mounting bracket. So I insulated the screws and put plastic pieces between the side of the radio and the bracket. I checked with a meter for continuity and the radio is not contacting the mounting bracket at all. Has anyone else had this issue putting a cd player in these trucks?
Any help would be appreciated
Thanks