Originally Posted by
bcorg
O.K..........I replaced the fuel pump relay and I found and checked the fuel inertia switch. I also cleaned the body ground connections under the hood. Still I get no fuel pump sounds and it appears that I am getting no fuel. Cranks over great...just no start.
Anybody got any suggestions where to look next?
Thanks,
Brett
I am going to change my fuel injectors. Where is the inertia switch as I
need to purge the fuel out of the feul rail lines before I start this project?Or is there some other way I can purge the lines.I Have 1 1990 Ford F250 7.3 Diesel.No power stroke.
Challe