Ok so I have fully read the post and feel pretty good about going about solving this. I have never felt my TC slip or heard any strange noises from the bell housing. Never seen RPM's jump or any other signs that the TC is going. My fluid is clean and doesn't smell burnt so without testing anything I have a hard time thinking its my TC. This may be an off topic question but there is a solenoid actuator looking thing right in the passenger corner of engine bay close to firewall. Do you know what this is, if not I can post a pic. Anyways the reason I ask is because I moved the little actuator arm and am wondering if that could be the reason I got code 62. It may be a stupid question but I am quite noobish Thanks for your help!