I installed the 4 gauge pod w/ GPR led from riffraff. After getting everything wired in the GPR led does not turn off, checked the GPR 12 Volts to the constant hot terminal 12 volts to small terminal left (counter clock wise) 4.46 volts to large terminal with LED hooked up, 9.86 volts with LED unhooked, and 0.00 volts to small terminal. Ground for the pod and the LED is a factory ground under dash.
Edit: Oh ya this would be KOEO
With KO power to constant hot only.







I also purchased a Stancor GPR and am having the same problem, reason for purchase (Does there have to be one? LOL)

Robert