Go to a place like Summit Racing, and look up a cam for one of these engines. Since they are aftermarket, they usually list all the engines that a certain cam will fit. You don't have worry about your particular cam, just look up any cam they have and if they cross over, then yours should swap.
For instance I do know for a fact that the 351c, 351m, 400, and I think also the 429 and 460 distributors are all the same. I have seen that before on their website when looking up distributors.
I also know the heads will swap from a 351c/351m and 400. Some of the components on the front of the engine will swap also.