Originally Posted by
critterf1
Are you still getting air out of the bleeders?
No air at all.
Originally Posted by
bucci
Perhaps there is air in the ABS module. If there is air in the ABS module, you have to take it someplace that can hook it up to a computer and cycle the solenoids to bleed the module.
The ABS seems to work fine when I road tested it on a snow covered section. Also, I was able to lock up the front brakes just not the rear. Additionally, I don't know if it matters with the ABS module but there is no brake or ABS warning light on the dash or code thrown.
Originally Posted by
T diesel
Are the bleeders on the top of your calipers?
On one side the bleeder is on top and the other side it is on the bottom as the calipers are the same just reversed.