Originally Posted by
andym
Ok, stop calling it "the EFI".
But it says "EFI" right on it. That's what it is, obviously
Sorry. So this misnomer is actually the throttle body/upper intake?
Originally Posted by
andym
Straight sixes don't have that lower intake to block sealing problems that the V8's do. But they do have one other place to that it's common to leak oil from and that's the pushrod cover on the driver's side of the block. That one's easy to access. To get to the valve cover gasket you just need to remove the throttle body and upper intake. It's a very easy job.
Could you elaborate on the location of pushrod cover?
Thanks, and sorry for being such a lamen
