Originally Posted by
SDV10
My 99 has it (looking at picture) above and behind the spot where you will mount the sensor. Blank plug with dead end cap. Real close to the headlight drivers side.
Thanks for the reply Bill, but I think what you see is the connector for the DRL (Daytime Running Lights) resistor. It's bolted to the panel behind the driver's headlamp and faces upward with 2 male pins in it. It is shaped like the number "8". Mine has no dead end cap on it--it is bare--you can see the 2 pin type terminals. The connector I am looking for is round shaped, about 3/4" in diameter, with 2 terminals in it. Which one do you see, the round one or the number "8" shaped one ???
RON