#11  
Old 01-18-2012, 03:59 PM
Myfreeford's Avatar
Myfreeford
Myfreeford is offline
Senior User
Join Date: Jun 2007
Posts: 349
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by Franklin2
Out at the regulator there should be a factory red/green wire. If you do not have this wire, you are in trouble right there. If you do have it, you should see if you have 12v on it when you turn the key to run. If you do, make sure this wire hooks to the "s" terminal of the regulator.
Would this be a direct wire from the ignition switch (at the key) to the "S" terminal on the regulator pigtail and is only hot when the key is in the run position?

Yes sir, that's it.