Cparks; Thanks and please do post pictures when you finish. That way we can provide ideas for others.
Here is what I came up with after reading posts from our previous/sister forum!
[IMG]
[/IMG]
These are 16 gage and welded to the existing braces, door and window frames. The lap and buckle mounts will bolt through the floor under which there is a very beefy plate that runs the width of the cab behind the seat. I feel confident that this system will secure our carcasses to the interior of the wreckage.
After we Decide on a new seat and determine the correct height, Debbie is a lot shorter then me. I will mount these plates behind the new panels!
[IMG]
[/IMG]